JVC UX-V330R - Manual (Page 19)

15
English
AUTO REVERSE
AUTO TAPE SELECTOR
TAPE
REMOTE CONTROL RM-RXUV5R
DIMMER SLEEP
DISPLAY FM MODE MD/AUX
AHB PRO AUTO PRESET CD
PROGRAM RANDOM REPEAT
BASS TREBLE CANCEL
PTY/EON
UP
SET
DOWN
TUNER BAND TAPE
VOLUME
CD
DISPLAY MODE
TAPE @ #
7
¢
4
TAPE @ #
4
¢
REV. MODE
When the System is in use, the display shows other items as well.
For simplicity, only the items described in this section are shown here.
Tape Direction indicator
Reverse Mode indicator
DOWN UP MULTI CONTROL
TAPE FM/AM CD
STANDBY/ON
PHONES
MD/
AUX
REC
REV MODE
AHB
PRO
TIMER
CLOCK
VOLUME
CD OPEN/CLOSE
The Cassette Deck allows you to play and record audio tapes.
■ With Automatic Tape Detection, you can listen to type I, II or
IV tapes without having to change any settings.
The use of tapes longer than 120 minutes is not recommended,
since characteristic deterioration may occur and these tapes
easily jam in the pinch-rollers and the capstans.
One touch play –––––––––––––––––––––––
By pressing the TAPE @ # button on the Unit or the Remote
Control, the Unit will come on, “TAPE” appears on the display,
and if a tape is in the deck, it will start to play. If no tape is loaded,
the Unit will come on and wait for you to insert a tape, or select
another function.
Standard Play
When the power is already on, you can use this basic procedure:
1 Press the TAPE 0 button on the Unit.
2 When the cassette holder opens, put the
cassette in, with the side you want to
listen to facing up.
• If the cassette holder does not open, turn the Unit off, then
back on and press the TAPE
0 button again.
3 Close the holder gently until it clicks.
4 Press the TAPE @ # button.
The tape is played in the direction shown by the Tape Direction
indicator.
5 If you need to change the playback direc-
tion, press the TAPE @ # button again.
The other Tape Direction indicator lights up and the tape
playback direction changes.
To stop playing, press the
7 button.
To remove the tape, stop the tape, and press the TAPE 0 button on
the Unit.
Fast-winding a tape ––––––––––––––––––
■ Press the ¢ or 4 button to fast-wind the tape.
• The Cassette Deck automatically stops when the tape
reaches its end.
Reverse Mode
You can set the cassette deck to play just one side of a tape, both
sides once, or both sides continuously.
Press the REV. (reverse) MODE button on
the Unit.
The indicator changes at each press of the button as shown.
: The Cassette Deck automatically stops after playing both
sides of the tape. (Stops when playback in the 2
direction is finished.)
: The Cassette Deck continues to play both sides of the
tape until the 7 button is pressed.
: The Cassette Deck automatically stops after playing one
side of the tape.
Using the Cassette Deck
(Listening to a Tape)
TAPE 0
Cassette
holder
7
EN12-24.UX-V30R/V330R[E] 00.1.20, 5:43 PM 15