JVC I'Art LCT1468-001B-A - Manual (Page 29)

Remote Programming
29
Cable/Satellite Search Codes Function
1) Slide the first 2-Way Mode Selector switch to CATV.
2) Press and hold down the P
OWER button, then press the R ETURN +/TV button for more than
three seconds.
3) Release the R ETURN +/TV button, then release the P OWER button.
4) Press the P OWER button on the remote, and see if the cable or satellite box responds.
5) If there was a response, press R ETURN +/TV. The codes are now set. If there was no
response, repeat Step 4. If you repeat Step 4 a total of 80 times without a response, use
the remote control that came with your equipment.
6) Press R ETURN +/TV to exit.
VCR/DVD Search Codes Function
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or
“DVD”.
2) Press and hold down the VCR or DVD P OWER button, then press the R ETURN +/TV button for
more than three seconds.
3) Release the R ETURN +/TV button, then release the VCR or DVD P OWER button.
4) Press the VCR or DVD P OWER button, and see if the VCR or DVD responds.
5) If there was a response, press R ETURN +/TV. The codes are now set. If there was no
response, repeat Step 4. If you repeat Step 4 a total of 80 times for the VCR (40 times for
the DVD player), and there is no response, use the remote control that came with your
equipment.
6) Press R ETURN +/TV to exit.
Search Codes
AV-56\65WP941 English 29 10/17/03, 1:02:55 PM