JVC DX-T66 - Manual (Page 40)

37
English
AUDIO menu
Item Contents
DIGITAL AUDIO OUTPUT Set this item correctly when using the OPTICAL DIGITAL OUTPUT terminal on the rear.
PCM ONLY: When connecting to audio equipment which can decode only linear PCM signals.
DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with a built-
in Dolby Digital decoder.
STREAM/PCM: When connecting to a DTS decoder or an amplifier with a built-in DTS decoder.
DOWN MIX This setting is effective for digital audio output if “DIGITAL AUDIO OUTPUT” is set to “PCM
ONLY.”
DOLBY SURROUND: Select this when connecting to a surround decoder.
STEREO: Select this when connecting to a stereo receiver, MD player, TV, etc.
D. RANGE COMPRESSION Set this item to listen to DVD Video recorded in Dolby Digital format at low or middle volume.
AUTO: You can enjoy powerful playback sound with full dynamic range.
ON: Select this when you want to fully apply the compression effect to make the sound at lower
volume clear (useful at midnight).
OTHERS menu
Item Contents
RESUME You can select Resume.
ON: The System resumes playback from the position where playback has been stopped if the disc is
still in the disc tray.
OFF: Resume is deactivated.
ON SCREEN GUIDE Activate or deactivate the on-screen guide.
ON: Activate the on-screen guide.
OFF: Deactivate the on-screen guide.
DivX REGISTRATION The System has its own Registration Code.
If necessary, you can confirm it.
Once you have played back a disc in which the Registration Code is recorded, the System’s
Registration Code is overwritten for copyright protection.
DX-T66[USUN].book Page 37 Tuesday, February 14, 2006 3:20 PM