JVC LVT1000-004A - Manual (Page 17)

14
CASSETTE OPERATIONS
Playing back a cassette
1 Press TAPE to set to the tape mode.
2 Press
§ STOP/EJECT to open the cassette
holder.
3 Load a cassette with the open side up and the
playback side facing out, then close the
cassette holder.
4 Press
2 PLAY to start playback.
To stop playback
Press
§ STOP/EJECT.
Playback automatically stops when the tape reaches the
end.
To fast-wind a tape
Press
1 FF or ¡ REW.
• To fast-wind in the forward direction:
1 FF
• To fast-wind in the reverse direction: ¡ REW
When the tape reaches the end, press
§ STOP/EJECT
to release the 1 FF or ¡ REW button.
Notes on cassette tapes
• It should be noted that it may be unlawful to re-
record pre-recorded tapes, records, or discs without
the consent of the owner of copyright in the sound
or video recording, broadcast or cable program and
in any literary, dramatic, musical, or artistic work
embodied therein.
• Use only normal tapes of type I for playback and
recording.
• Use of tapes longer than 120 minutes is not
recommended, since characteristic deterioration may
occur and these tapes easily jam in the pinch roller and
capstan.
• Loose tape can cause trouble. If you notice some slack
in the tape, tighten it up using a pencil.
To prevent accidental erasure
Remove the tab(s) with a screwdriver. When you want
to erase the recording or re-record on the tape, reseal the
slot(s) with adhesive tape.
STANDBY
SEARCH UP
SEARCH DOWN
REMOTE SENSOR
PLAY/PAUSE
STOP
RANDOM INTRO
RC-ST3
CD PORTABLE SYSTEM
1 4 3 2 1 FF ¡ REW
02_01-18_RCST3SL_B_En.p65 2/4/03, 2:38 PM 14