JBM electronic C-130 - Manual (Page 7)

Page -7-
Copyright
©2007 JBM Electronics, Inc.
METHOD 2: PC to ETH1
• Select “Use the following IP address” and fill in the blank fields with the
information below:
•
IP address: 192.168.1.2
• Subnet mask:
255.255.255.0
• Default gatewa:y
192.168.1.1
• Preferred DNS:
192.168.1.1
• Click “OK”
• The previous screen will appear Click “OK”
Verify that the IP change was accepted or acquired on the PC.
Select “Start>Run on your desktop ” Type “cmd” Click “OK”
• Type “ipconfig”