JVC KY-F75 - Manual (Page 24)

E20
How to record
Operations for the various settings of the KY-F75 and camera recording are performed using the
[KY-LINK] application software.
Digital images are transferred from the camera to the computer at a rate of 7.5 frames per
second. When a footswitch or other external trigger device is connected to the KY-F75, the
camera image can be frozen by the external trigger input signal.
Basic operations for recording
1.
Turn ON the KY-F75.
Wait for 5 seconds or more.
2.
Start the [KY-LINK] application software.
Ⅵ Make camera settings as required. Menu screen settings ( ੬ page E24)
Ⅵ Freeze the image as required. (Still image)
3.
Capture the still image on the computer (Capture)
4.
Save the captured image on the computer.
5.
Close the [KY-LINK] application software.
Wait for 5 seconds or more.
6.
Turn OFF the KY-F75.
3. Recording