JVC KY-F75 - Manual (Page 13)

E9
DC IN terminal (Mini DIN 8-pin, female)
Pin configurations of connectors (continued)
Pin no. Signal name
1 NC
2 GND
3 NC
4 NC
5 GND
6 12V
7 NC
8 12V
LENS terminal (Metal 12-pin, female)
Pin no. Signal name
1 NC
2 NC
3 GND
4 NC
5 IRIS CONTROL
6 12V DC 400mA max.
7 IRIS POSITION
8 IRIS AUTO /MANU
9 to 12 NC
Terminal
name
2 TRG IN
4 FLASH
REMOTE terminal (Metal 10-pin, female)
Pin no. Signal name
1 —
2 TRG IN L active
3 NC
4 FLASH OUT L active
5 —
6 NC
7 NC
8 GND
9 12V output (only when power
is supplied from AC adapter)
10 NC
CAUTION
• Consult your JVC dealer concerning the re-
mote terminal connection.
• Remote cable must use shielded cable.
Outer shield of remote cable must to connect
10-pin connector outer metal shell.
• Do not input the external trigger during the
first 10 seconds after the power is turned ON.
I/O
IN
• 3.3V CMOS
• Schmidt Trigger
• Pull-up to 3.3V at
4.7k Ω
OUT
• Open collector
Conditions
• Contact point
recommended
• Maximum rated
voltage: 5.3V
• H level: 2.4 ~ 5.0V
• L level: 0 ~ 0.5V
• Pulse width:
Min. 130 ms
• Maximum rated
current: 150mA
• Maximum rated
voltage: 12V CAUTION
Use device whose current consumption is max.
400 mA or less.
1
4
3
6
7
8
5
2
1
2
8
7
10
6 3
4 5
9
4
3
2 8
9 1
7
6
11
5
10
12
Compatible plug:
HR10A-10P-10P
(Hirose Electronics)