Johnson Controls AS-CVTPROx00-1 - Manual (Page 2)

2 AS-CVTPROx00-1 Zone Bus/N2 Bus Interface Converter Installation Instructions
Table 1: Cables Included with the CVTPRO Converter
To Connect the CVTPRO
Converter To: Use This Cable:
PC via RS232 CVTPRO serial cable (18 inches/457 mm)
Controller via the Zone Bus 8-pin RJ45 to 6-pin RJ11 phone cable (6 ft/1.8 m)
Controller via the N2 Bus 4-pin N2 socket/3-pin N2 plug to 6-pin RJ11 phone cable (6 ft/1.8 m)
Note:
Remove the 4-pin N2 socket from the cable and use the bare wires to
connect to N2 screw terminal devices.
Controller Zone Bus (via TE-6x00/
TMZ sensor) 6-pin to 6-pin RJ11 phone cable (6 ft/1.8 m)
Table 2: Connections to Palm Devices
To Connect the CVTPRO
Converter To: Use: In This Sequence
Palm III and Palm VII Devices Nothing Palm III/Palm VII ⇒ CVTPRO converter
Palm V Device Dock V Pro™ Adapter
1
Palm V ⇒ Dock V Pro Adapter ⇒ CVTPRO converter
Palm m100 and m105 Devices Palm HotSync® Cable
2
Null Modem Adapter
2
CVTPRO Serial Cable
3
Palm m100/m105 ⇒ Palm HotSync Cable ⇒ null
modem adapter ⇒ CVTPRO Serial Cable ⇒
CVTPRO converter
Palm m125, m130, and m5xx
Devices Belkin® Serial Sync Cable
2
Null Modem Adapter
2
CVTPRO Serial Cable
3
Palm m125/m130/m5xx ⇒ Belkin Serial Sync Cable
⇒ null modem adapter ⇒ CVTPRO Serial Cable ⇒
CVTPRO converter
1 The Dock V Pro adapter is available from Solvepoint Corporation at www.palmdock.com and local retailers.
2 Order through Johnson Controls e-Purchasing (ITAS). See Table 3.
3 Included with the CVTPRO converter.
Table 3: CVTPRO Converter and Accessories Product Code Numbers
Product Code
Number Description
AS-CVTPRO100-1 Zone Bus/N2 Bus Interface Converter with 120VAC/3VDC power adapter (North American
version)
AS-CVTPRO200-1 Zone Bus/N2 Bus Interface Converter without power adapter (European version)
AS-CVTPRO-701 CVTPRO converter without cables or case
AS-CVTCBL-700 Replacement set of cables used with the CVTPRO converter
Dock V Pro adapter** Adapter to connect the CVTPRO converter to a Palm V device
F3X1082-03* Belkin Serial Sync Cable for use with CVTPRO converter and Palm m125/m130/m5xx Devices
ME213* Black Box™ Null Modem Adapter for use with CVTPRO and Palm
m100/m105/m125/m130/m5xx Devices
P10701U* Palm HotSync Cable for use with CVTPRO converter and Palm m100/m105 Devices
* These are the manufacturer’s code numbers, not Johnson Controls code numbers. Order through Johnson Controls
e-Purchasing (ITAS).
** The Dock V Pro adapter is available from Solvepoint Corporation at www.palmdock.com and local retailers.