John Lewis JLRC101 - Manual (Page 12)

12
Description of the cooktop
A Triple ring burner 3.30 kW
B Semi-rapid burner 1.75 kW
C Semi-rapid burner 1.75 kW
D Triple ring burner 3.30 kW
E Simmer burner 1.00 kW
F Rapid burner 3.00 kW
Assembly
Fitting the adjustable feet
Before assembling the cooker remove all the
parts that are not firmly attached to it, in
particular the pan supports and burners. To
lighten the weight of the cooker, the
accessories inside the ovens may also be
removed, preventing accidental damage
during the overturning process.
The cooker is delivered with the feet removed. Before
moving and connecting up the cooker, take the feet from
the packaging and screw them onto the cooker. This can be
done in one of two ways:
A Lifting the cooker off the floor.
B Laying the cooker on its back.
The final adjustment of the feet to level the Cooker to the
floor will be done after the gas and electrical connections
have been made.
Should it be necessary to move the cooker,
screw the feet in completely and carry out
the final levelling adjustment only when the
gas and electrical connections have been
made.
Levelling the cooker to the floor
After having made the electrical and gas hook-ups, level the
cooker to the floor using the adjustable feet that were
previously screwed onto the bottom of the cooker.
Should it be necessary to drag the cooker,
screw the feet in completely and carry out
the final regulation only when the other
operations are completed.
%
&
)
( $
'
$ %