JVC HR-A22U - Manual (Page 8)

8
Clock Setting
q
2 3
6 5 / 8
OK
CH
1 2 3
4 5 6
7 8
0
9
q 6 5
4
Y T
2 3
MENU
MENU
INITIAL SETTINGS (cont.)
NUMBER
OK
CH
ACCESS MODE SELECT
SCREEN
1
Place the arrow at the
Initial Set screen next to
“CLOCK SET” by pressing
CH
5∞, then press OK.
SET DATE, TIME AND D.S.T.
2
Press the appropriate
NUMBER keys to set the
date and time (if only 1
digit, press "0" first), and
press CH▲▼ to set AM/
PM and D.S.T. (Daylight
Saving Time) to “ON”
(automatic adjustment
based on VCR’s clock) or
“OFF” (if D.S.T. doesn’t apply to you).
Press OK after AM/PM and D.S.T. settings, and when
you’re finished with this screen, press MENU to start
the clock.
NOTE:
CH ▲▼ can be used to perform all operations. (In this
case, press OK after each setting.)
MAKE CORRECTIONS
3
To change any of the settings, press OK until the item
you want to change blinks, then set as in step 2.
INITIAL SET
=CLOCK SET
LANGUAGE SELECT
PRESS ( 5,∞), THEN (OK)
PRESS (MENU) TO END
CLOCK SET
DATE 1/ 1/96 MON
TIME – – : – – AM
D.S.T. ON
PRESS NUMBER KEY(0-9)
OR ( 5,∞), THEN (OK)
PRESS (MENU) TO END