JVC HR-J631T - Manual (Page 5)

5
1 2 3
4 5 6
7 8 9
0
1 2 3
4 5 6
7 8 9
0
6
q
Clock
TURN ON THE VCR
1
Press POWER. If watching channel 13, press
TV/VIDEO to select the VIDEO mode. VIDEO is
displayed on the front display panel.
ACCESS ON-SCREEN
MENU
2
Press MENU to bring up the Main Menu screen.
ACCESS INITIAL SET
SCREEN
3
At the Main Menu screen,
place the arrow next to
“INITIAL SET” by pressing
CH
5∞, then press OK.
ACCESS CLOCK SET
SCREEN
4
Place the arrow at the
Initial Set screen next to
“CLOCK SET” by pressing
CH
5∞, then press OK.
SET DATE AND TIME
5
Press the appropriate
NUMBER keys to set the
date and time (if only 1
digit, press "0" first). Press
CH▲▼ to set AM/PM,
then press OK . The next
setting that can be set
begins flashing. When
you’re finished with this
set-up procedure, press MENU to start the clock.
NOTE:
CH ▲▼ can be used to perform all operations. (In this
case, press OK after each setting.)
MAKE CORRECTIONS
6
To change any of the settings, press OK or PUSH JOG
™£
until the item you want to change blinks,
then set as in step 5.
INITIAL SETTINGS
POWER
POWER
TV/VIDEO
CH 5∞
OK
MENU
MAIN MENU
PROGRAM SET
FUNCTION SET
TUNER SET
=INITIAL SET
B.E.S.T.PICTURE SYSTEM
PRESS ( 5,∞) THEN (OK)
PRESS (MENU) TO END
INITIAL SET
=CLOCK SET
G-CODE SET-UP
PRESS ( 5,∞), THEN (OK)
PRESS (MENU) TO END
CLOCK SET
DATE 1/ 1/96 MON
TIME – – : – – AM
PRESS NUMBER KEY(0-9)
OR ( 5,∞), THEN (OK)
PRESS (MENU) TO END
NUMBER
PUSH JOG ™/£
CH
5∞
OK
MENU