JVC RD-T5BU - Manual (Page 8)

5
RD-T7GN/RD-T5BU(US) / LVT0737-003A / English
English
■■
Using the Tuner
You can listen to FM and AM stations. Stations can be tuned in
manually, automatically, or from preset memory storage.
Setting the AM Tuner Interval
Spacing ——————————————
When shipped, the AM tuner interval is set to 9 kHz spacing. You
can change it to 10 kHz spacing.
To select 10 kHz intervals, while holding down the
¢ button
on the Unit in Standby mode, press the % button on the Unit to turn
on the power (at the same time, the 100 kHz spacing is selected for
FM broadcast).
To select 9 kHz intervals again, while holding down the
4
button on the Unit in Standby mode, press the % button on the Unit
to turn on the power.
Note: When you change the setting, the preset stations are erased.
You will need to preset the stations again. (See page 6.)
One Touch Radio (AC power only) —
Just press the TUNER BAND button to turn on the Unit and start
playing the station you were last tuned to.
■
You can also switch from the CD Player to the radio by pressing
the TUNER BAND button.
■
1. Press the TUNER BAND button.
The Band and Frequency you were last tuned to appear on the
display.
Each time you press the button, the band changes as follows:
■
2. Select a station using one of the following
methods.
■
Manual Tuning
Press the
4 or ¢ button repeatedly to move from frequency
to frequency until you find the station you want.
OR
■
Auto Tuning
If you press and hold the
4 or ¢ button for one second or
more, the frequency changes down, or up, automatically until a
station is found.
OR
■
Preset Tuning using the Unit (Possible only after pre-
setting stations)
Press the
7 P.TUNING button to select the preset station.
After you have selected the preset number, the band and the fre-
quency are displayed.
•
Example:Press the 7 P.TUNING button until the preset
number 12 “P- 12” appears.
OR
■
Preset Tuning using the Remote Control (Possible
only after presetting stations)
Select the station by entering its preset number on the number
keys.
•
Example:For channel 5, press 5. For channel 15, press +10
then 5. For channel 25, press +10 twice, then 5.
For channel 30, press +10 twice, then 10.
• The band and the frequency are displayed.
■
3. Turn the antenna for best reception.
• For FM broadcast, extend the built-in wire antenna.
• For AM broadcast, turn the Unit itself.
REMOTE CONTROL RM-SRDT7
VOLUME
BASS/TREBLE
BAND
FM MODE
TUNER CD
SLEEP
AHB PRO
REPEAT
4 5 6
1 2 3
10 +10
7 8 9
SNOOZE
/DIMMER
STANDBY/ON
P.TUNING
TUNER BAND CD
RANDOM/ REPEAT BASS/ TREBLE
MULTIJOG
VOLUME
AHB PRO
SNOOZE/DIMMER
CD/TUNER ALARM
TIMER
SLEEP CLOCK/ DISPLAY
STANDBY
STANDBY/ON
CD PORTABLE SYSTEM
4 ¢
■
P.TUNING Number keys
Band display, Frequency display, Preset channel
TUNER BAND
[RD-T7GN Only]
TUNER BAND
¢
4
(Display when using the Tuner)
CLOCK/DISPLAY
Tuning In a Station
STANDBY
STANDBY/ON
STANDBY
STANDBY/ON
[10 kHz Intervals] [9 kHz Intervals]
FM AUTO FM MONO AM
P.TUNING
or
For FM For AM
RD-T5BU&T7GN(US).book Page 5 Friday, June 29, 2001 9:08 AM