JVC RD-T5BU - Manual (Page 12)

9
RD-T7GN/RD-T5BU(US) / LVT0737-003A / English
English
■■
Using the Timers
The timers let you control listening a music source as well as an
alarm tone.
Three types of timers are available.
CD/Tuner Timer ( TIMER1):
Use this timer to wake you up to music from a CD or tuner.
Alarm Timer ( TIMER2):
Use this timer as an alarm clock.
Sleep Timer:
Use this timer to fall asleep to music. Your System turns off auto-
matically after a certain length of time.
CAUTION: If memory backup batteries are ex-
hausted or not installed, and the AC power cord is
disconnected or there is a power failure, time set-
tings will be erased from memory in approx. half
a day. Then, the display blinks “0:00”. If this hap-
pens, set the current time (clock) and perform the
timer setting again.
When the Unit is operated on AC power or batteries for the first
time, the time indication “0:00” will blink on the display and you
need to set the clock.
You can set the clock whether the Unit is turned on or off (Standby)
if the AC power is supplied to the Unit.
Notes:
• The clock must be correctly set for the timer to work.
• The clock may gain or lose 1 to 2 minutes per month.
• Perform each setting step within 30 seconds. Otherwise, setting is
cleared and the procedure must be repeated from the beginning.
(On the Unit)
■
1. Press the CLOCK/DISPLAY button for 3 sec-
onds or more.
The hour digits blink.
■
2. Turn the Jog dial to set the hour.
■
3. Press the CLOCK/DISPLAY button.
The minute digits blink.
■
4. Turn the Jog dial to set the minute.
■
5. Press the CLOCK/DISPLAY button.
“CLOCK OK” appears for 2 seconds. The selected time is set
and the seconds start counting from 0.
.
The CD/Tuner timer is turned on at the set time so that you can wake
up to music from a CD or tuner. The volume fades in when the Unit
turns on. The System will automatically turn off in 1 hour.
Note: Perform each setting step within 30 seconds. Otherwise,
setting is cleared and the procedure must be repeated from
the beginning.
(On the Unit)
■
1. Press the CD/TUNER TIMER button.
The current hour digits blink. Also, the Timer 1 indicator
(
TIMER1) blinks.
■
2. Turn the Jog dial to set the hour.
■
3. Press the CD/TUNER TIMER button.
The current minute digits blink.
■
4. Turn the Jog dial to set the minute.
■
5. Press the CD/TUNER TIMER button.
The current source name blinks.
■
6. Turn the Jog dial to set the source.
The source name alternates between “CD” and “TUNER”.
REMOTE CONTROL RM-SRDT7
VOLUME
BASS/TREBLE
BAND
FM MODE
TUNER CD
SLEEP
AHB PRO
REPEAT
4 5 6
1 2 3
10 +10
7 8 9
STANDBY/ON
SNOOZE
/DIMMER
P.TUNING
TUNER BAND CD
RANDOM/
REPEAT
BASS/
TREBLE
MULTIJOG
VOLUME
AHB PRO
SNOOZE/DIMMER
CD/TUNER ALARM
TIMER
SLEEP
CLOCK/
DISPLAY
STANDBY
STANDBY/ON
CD PORTABLE SYSTEM
CLOCK/DISPLAY
SNOOZE/
DIMMER
SLEEP
[RD-T7GN Only]
Jog dial
CD/TUNER TIMER
ALARM TIMER
SLEEP indicator
SNOOZE/DIMMER
[RD-T7GN]
SNOOZE
[RD-T5BU]
SLEEP
Timer 1 indicator
Timer 2 indicator
(Display when using the Timer)
Setting the Clock
CLOCK/
DISPLAY
MULTIJOG
VOLUME
MULTIJOG
VOLUME CLOCK/
DISPLAY
CLOCK/
DISPLAY
(for 3 sec)
Setting the CD/Tuner Timer
RD-T5BU&T7GN(US).book Page 9 Friday, June 29, 2001 9:08 AM