JBL VRX900 - Manual (Page 3)

INTRODUCTION TO THE VRX932LA
The VRX932LA is a two-way, line-array loudspeaker system intended for use in arrays of up to six enclosures.
Three high-frequency drivers are mounted to the Constant Curvature waveguide which is designed so that
multiple enclosures may be arrayed with no discontinuity in the vertical coverage pattern. As a result, the array
will behave in much the same way as would a single loudspeaker. Array coverage may be adjusted by means
of the Array Configuration Selector (ACS), a feature that provides amplitude shading (see page 15 & 16) when
the system is used in passive mode. Integral rigging hardware, a dual angle pole socket and an accessory array
frame provide for a variety of mounting and suspension options.
*NOTE: The VRX932LA-WH is designed for fixed install situations where white loudspeakers are required to
match existing decor. White versions therefore do not have handles, feet or pole mount features.
3
Dimensional Drawings for VRX932LA
343 mm
13.5 in
376 mm
14.8 in
597 mm
23.5 in
1325 mm
52.2 in
15º
JBL PROFESSIONAL
Northridge, CA USA
Made in USA Serial No.
BI-AMP PASSIVE
PARALLEL
VRX932LA
BI-AMP
±1 LF: 8
±2 HF: 6 Ω Ω
PASSIVE
±1 IN: 6
±2 N/C Ω
Single Speaker or Short
Throw Mid Throw Long
Throw
Array Configuration Selector - HF Output Level
Equipped with Differential DriveÆ Transducer Technology U.S. PATENT 5,748,760
Dimensions in mm (inches)
343
(13.5)
376
(14.8)
597
(23.5)
R: 1325
(52.2)
15 o