JBL VRX900 - Manual (Page 11)

11
INTRODUCTION TO THE VRX915M
The VRX915M is a dedicated, compact and lightweight, 15", two way touring-class floor monitor, with only
a 375mm (14.75 in) stage height and JBL’s latest neodymium-magnet transducers.
A 380 mm (15 in) 2265H patented Differential Drive ® woofer handles 800 watts (continuous) and delivers
accurate and precise low frequency reproduction. The 2452H 102 mm (4 in) voice-coil compression driver is
coupled to a 50° x 90° aluminum horn to provide smooth and clear high frequency reproduction, critical for high
performance monitoring.
Bi-amp or full-range passive operation may be selected via a recessed, high-current switch mounted alongside
the NL4 input connector in one of the handle cups. An additional NL4 connector is mounted in the other handle
cup for a convenient loop-thru connection, minimizing cable runs on stage.
The enclosure is constructed of top quality Baltic birch plywood and is coated in JBL’s rugged DuraFlex™
finish. It is a symmetrical 30° wedge design, with four non-slip rubber feet per side enabling convenient left and
right applications of adjacent monitors. The transducers are protected by an attractive 16 gauge CNC-machined
steel grille, which is internally lined with acoustically transparent foam to provide additional transducer protection.
324 mm
12.75 in
432 mm
17.00 in
629 mm
24.75 in
374 mm
14.71 in
546 mm
21.51 in
191 mm
7.51 in
159 mm
6.25 in
Dimensional Drawing for VRX915M
324
(12.75)
432
(17.00)
629
(24.75)
159
(6.25)
375
(14.75)
546
(21.51)
191
(7.51)
Dimensions in mm (inches)