Jabra CRUISER2 - Manual (Page 15)

14
english
Jabra CrUISEr2
I can not connect speakerphone and radio via FM transmitter
- Make sure the radio is turned on and speakerphone is in FM
mode (FM Status Icon is on) .
- If your radio when searching is not able to find the FM frequency
set by your speakerphone, the FM frequency must be tuned
in manually on the radio . Please read radio manual to find out
how to manually change frequency on your radio .
- If your radio is in Ta (Traffic announcement) mode, switch Ta
off and your radio should be able to find your speakerphone
when using the search function on the radio . If not tune in
manually .
- The sensitivity of the search function on your radio determines
whether it is able to find the frequency set by your speakerphone .
On some radios you are able to adjust the sensitivity thus
making it possible to find the speakerphone frequency when
searching . If not tune in manually .
- In urban areas it might be difficult to find a clear frequency .
It is therefore advisable to use a frequency in the lower or upper
end of the FM frequency band (e .g . 88 .1 or 107 .7 MHz) where
you will have the best chance to find a clear frequency .
neeD MoRe HeLP?
1. Web: http://www .jabra .com
(for the latest support info and online User Manuals)
2. E-mail:
australia
support .au@jabra .com
China support .cn@jabra .com
Japan support .jp@jabra .com
Singapore support .sg@jabra .com
Information: info@jabra .com
3. Phone:
australia
1-800-738-521
China 800-858-0789
Japan 03-3242-8722
Singapore 800-101-2329