JVC KW-XC828 User Manual
Page 9
9
ENGLISH
Storing stations in memory
You can use one of the following methods to
store broadcasting stations in memory.
• Automatic preset: SSM (Strong-station
Sequential Memory)
• Manual preset
• Storing your favorite station into the EX button
Automatic preset: SSM
You can preset 6 local stations in each FM band
(FM1, FM2, and FM3).
1
Select the band (FM1, FM2, or FM3).
2
Press MODE repeatedly until “SSM”
appears.
3
Press SEL.
Local stations with the strongest signals are
searched for and stored automatically in the band
you have selected (FM1, FM2, and FM3). These
stations are preset in the number buttons — No.
1 (lowest frequency) to No. 6 (highest frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
“--SSM--” appears, then disappears when
automatic preset is over.
Manual preset
You can preset up to 6 stations in each band
(FM1, FM2, FM3, and AM) manually.
EXAMPLE: Storing an FM station of 88.3 MHz
into the preset channel number 1 of
the FM1 band
1
Select the FM1 band.
2
Tune in to a station (in this example,
of 88.3 MHz).
“P1” flashes for a few seconds.
3
Press and hold the number button
(in this example, 1) for more than 2
seconds.
4
Repeat the above procedure to store
other stations into other preset
numbers.
FM1
FM2
FM3
AM
Press
¢
to tune in
to stations of higher
frequencies.
Press
4
to tune in
to stations of lower
frequencies.
EN08-11KW-XC828[U]
02.1.30, 5:33 PM
9