JVC DR-MH20B - Manual (Page 46)

Filename [DR-MH30EU_07Timer Recording.fm]
Masterpage:Left0
46
EN
Page 46 Thursday, 3 June 2004 16:51
TIMER RECORDING
You can programme this unit to timer-record as many as
32 programmes.
With the VIDEO Plus+ system, timer programming is greatly
simplified because each TV programme has a corresponding code
number which your unit is able to recognize.
You can use the remote control to enter the PlusCode number.
1
Load a recordable disc if recording to DVD.
2
Press PROGRAMME to access the programme top screen.
3
Press rtw e to select “VIDEO Plus”, then press ENTER.
● When “PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMMES” appears on the TV screen, you need to cancel
some of the reserved programmes. (
੬ pg. 49)
4
Press the number keys to
enter the PlusCode number of a
programme you wish to record.
OR
Press rtw e to select the
desired number key on the
screen, then press ENTER.
Repeat to enter all needed
numbers.
● If you have made a mistake, press CANCEL (&) and input the correct
number before you press ENTER.
● To clear all entered numbers at a time, press CLEAR (8).
5
Press rt to select “RECORD TO”, then press ENTER. Press
rt to select the desired recording deck, then press ENTER.
6
Press rtw e to select “CONFIRM”, then press ENTER.
● If the number you entered is invalid, “PlusCode NO. ERROR
CONFIRM PlusCode NO. THEN RETRY” appears on the TV screen.
Input a valid PlusCode number.
● If “GUIDE PROGRAM IS NOT SET SET GUIDE PROGRAM THEN
RETRY” appears on the TV screen, set Guide Program Numbers
manually. (
੬ pg. 72)
7
The PlusCode number you entered and the matching timer-
recording information are displayed on the TV screen. Check the
programme data.
● To cancel this setting, press RETURN.
8
Press rt to select the desired recording option as required.
Press rt to select the desired setting, then press ENTER.
● “INPUT TITLE” ( ੬ pg. 52, “Modify Title Name”)
● “CATEGORY” ( ੬ pg. 53, “Modify Category”)
● “VPS/PDC” ( ੬ pg. 47, “PDC Recording”)*
* VPS (Video Programme System) recording is not currently available in
the U.K. and not possible with this unit.
● “WEEKLY/DAILY” ( ੬ pg. 47, “Weekly/Daily Recording”)
● “REC MODE” ( ੬ pg. 37, “Recording Mode”)
9
Press rt to select “OK”, then press ENTER to access the
Programme Confirmation screen.
10
Press w e to select “EXIT”, then press ENTER to complete
timer programming.
● To programme another timer, press w e to select “CONTINUE”, then
press ENTER.
● If “PROGRAMME OVERLAPPED” appears on the TV screen, see
page 49.
NOTES:
● There may be cases that VIDEO Plus+ Timer Programming function
prolongs the stop time of the programming.
● When two successive programmes are recorded on a DVD-RW disc
with VIDEO Plus+ Timer Programming function, the beginning of the
second one may be left off the recording.
● If the copy limited programme is received during timer-recording, the
unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you programmed.
VIDEO Plus+ ® Timer Programming
● Make sure that the unit’s built-in clock is set properly.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
PROGRAMME
DISPLAY
CLEAR
0 – 9
VPS/PDC#
RETURN
ENTER
CANCEL
CABLE/DBS
DVD TV
PROGRAMME > VIDEO Plus+ (1/2)
PlusCode NO.
PRESS [PROGRAM]
TO EXIT
SELECT WITH [ ]
THEN PRESS [ENTER]
CONFIRM
RECORD TO
1 2 3 4
1 2
4 5 6
7 8 9
0 DELETE DELETE ALL
DVD ENTER
SELECT EXIT
PROGRAM
3
1 2 3 1 2 2 3
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see “VIDEO Plus+
® System Setup” (
੬ pg. 72) and
set the Guide Program number correctly.
IMPORTANT:
If you have moved to a different area or if a broadcasting station’s
channel number has been changed, the wrong programme number
will be displayed on the VIDEO Plus+ programme screen in step 7.
When this happens, set the correct Guide Program number for that
station. (
੬ pg. 72, “VIDEO Plus+
® System Setup”)
Satellite Receiver Users
To timer-record a satellite broadcast using the VIDEO Plus+
system:
A Perform “Satellite Receiver Control Setting” (੬ pg. 25).
B Perform “VIDEO Plus+
® Timer Programming” ( ੬ pg. 46).
C Leave the satellite receiver’s power on.
DR-MH30EU_07Timer Recording.fm Page 46 Thursday, June 3, 2004 4:55 PM