JVC TV 20240 - Manual (Page 7)

CABLE BOX CONNECTION
There are two basic types of antenna/cable hook-ups. They are easy to distinguish.
Type 1:
If you use an antenna or have a cable television system that does not require the use of a
decoder box to receive signals, use the diagram below to connect your TV/VCR combo.
Type 2:
If you use an cable box to access any or all channels, use the diagram below.
1) Connect the cable or antenna wire out from the wall in to the TV VHF/UHF
input at the rear of the combo unit.
2) Plug the power cord into a nearby AC outlet.
1) Connect the cable wire out from the wall in to the cable box RF input.
2) Connect an RF cable out from the cable box in to the TV VHF/UHF input.
3) Plug the power cord into a nearby AC outlet.
C O N N E C T I O N S 6