John Deere GP-2700GH - Manual (Page 15)

Operator’s Manual 5
SeT-uP
. This unit should only be placed on a level surface to ensure
proper lubrication for the engine and water pump while
operating. NEVER spray water directly on the unit!
. Do not use unit in an area:
a. with insufficient ventilation.
b. where there is evidence of oil or gas leaks.
c. where flammable gas vapors may be present.
dAnGeR: RISK Of exPlOSIOn OR fIRe!
dO nOT PlACe unIT In An AReA WHeRe
flAmmAble GAS vAPORS mAy be
PReSenT. A SPARK COuld CAuSe An
exPlOSIOn OR fIRe!
. Do not allow the unit to be exposed to rain, snow or freezing
temperatures. If any part of the unit becomes frozen, excessive
pressure may build up in the unit which could cause it to
burst resulting in possible serious injury to the operator or
bystanders.
dAnGeR: RISK Of unIT buRSTInG! dO nOT
STORe/OPeRATe unIT In A fReezInG
envIROnmenT!
4. Check the oil level indicator on the pump crankcase. Be
certain the oil level is in the center of the sight glass before
each use. If the level appears to be low, fill with John Deere
Hy-Guard pump oil. DO NOT OVERFILL!
Preparation