Rear view – JVC DR-M10S User Manual
Page 11

Masterpage:Right-No-Heading
EN
11
Filename [DR-M10SE_06Name.fm]
Page 11
February 13, 2004 2:15 pm
REAR VIEW
A Antenna Input Connector (ANTENNA IN)
B Component Video Output Connectors
(COMPONENT VIDEO OUT )
C S-video Output Connector (S-VIDEO OUT)
D Audio Output Connectors
(AUDIO OUT (RIGHT/LEFT))
E AV COMPU LINK Connector*
* Not function with this unit.
F Digital Audio Output Connectors
(DIGITAL OUT (COAXIAL/OPTICAL))
G Cooling Fan
● This prevents the temperature from rising inside the unit.
Do not remove it.
● Install the unit so as not to block the area around the fan.
● The cooling fan on the rear of the unit may be activated even if the
unit is turned off in the following cases;
—
In the timer Auto Satellite Programme Recording standby mode
੬
pg. 63, slightlybefore the starting time of VPS/PDC recording
—
If you record the decoder or the satellite receiver to L-2 IN/
DECODER and if “L-2 SELECT” is set to “DECODER” or “SAT
VIDEO” or “SAT S-VIDEO”.
pg. 83
—
“JUST CLOCK” is set to “ON”
੬
pg. 105
H Mains Power Cord
I Antenna Output Connector (ANTENNA OUT)
J L-1 Input/Output Connector (L-1 IN/OUT)
੬ pg. 16, 81, 82, 88, 90
K L-2 Input/Decoder Connector
(L-2 IN/DECODER)
੬ pg. 26, 81, 88, 90
L Satellite Control Connector (SAT CONTROL)
੬ pg. 26
M Region Number Label
੬ pg. 6
DR-M10SE_06Name.fm Page 11 Friday, February 13, 2004 2:16 PM