JVC EX-D1 User Manual
Page 37
35
Connect the other audio device to this system in
advance (page 10).
1
Press AUX.
The source changes to AUX.
2
Play the other audio device.
For details, refer to the manual of the device
connected.
3
Adjust the volume and the
sound quality of the system
(page 10).
Without setting the built-in clock, you cannot use
any timers.
• To exit from the clock setting, press CLOCK/
TIMER as required.
• To correct a misentry during the procedure
below, pressing CANCEL can return to the
previous step.
1
Press CLOCK/TIMER.
• If you have already adjusted the clock
before, press the button repeatedly until the
clock time starts flashing.
2
Press cursor
2/3 to adjust the
hour, then press SET.
3
Press cursor
2/3 to adjust the
minute, then press SET.
Now the built-in clock starts to work.
Using the daily timer, you can wake up with your
favorite song.
• You can store the three daily timer settings;
however, you can activate only one of the daily
timer.
• To correct a misentry during the procedure
below, pressing CANCEL can return to the
previous step.
Setting the built-in clock
Setting the daily timer
S V C DV D - A
Setting the Various Timer
Listening to the sound of
other audio device
EX-D1[J].book Page 35 Wednesday, March 2, 2005 9:53 PM