Pecifications – JBL Synthesis S4S User Manual
Page 11
S
PECIFICATIONS
S4S
Frequency Response (–6dB)
20Hz – 150Hz (THX
®
/LFE mode)
Maximum Recommended Amplifier Power†
500 Watts per channel
Impedance
4 Ohms nominal
Sensitivity
88dB (2.83V/1m), both woofers driven
Woofer
Dual 10" polymer-coated aluminum cones w/rubber surrounds
Dimensions (H x W x D, mounted in S4SBB
64" x 14" x 5.1" (1626mm x 356mm x 130mm)
enclosure, not including Styrofoam
™
blocks)
Mounting Cutout Size (W x H)
15" x 24.55" (381mm x 624mm)
Weight per Speaker
24 lb (10.9kg)
All features and specifications are subject to change without notice.
† The maximum recommended amplifier power rating will ensure proper system headroom to allow for occasional peaks. We do not recommend sustained
operation at these maximum power levels.
JBL, Harman International, JBL Synthesis and Synthesis are trademarks of Harman International Industries, Incorporated, registered in the United States
and/or other countries.
Dolby is a registered trademark of Dolby Laboratories.
DTS is a registered trademark of DTS, Inc.
Styrofoam is a trademark of the Dow Chemical Company.
THX is a registerd trademark, and THX Ultra2 is a trademark, of THX Ltd. All rights reserved.
11
Declaration of Conformity
We, Harman Consumer Group International
2, route de Tours
72500 Château du Loir
France
declare in own responsibility that the product described in
this owner’s manual is in compliance with technical stan-
dards:
EN 61000-6-3:2001
EN 61000-6-1:2001
Laurent Rault
Harman Consumer Group International
Château du Loir, France 10/05
S4S OM 10/18/05 12:02 PM Page 12