JVC HR-J630U - Manual (Page 24)

24
COUNT 0:33:27
Tape Position Indicator
The Tape position indicator appears
on screen when, from the stop
mode, you press FF, REW or perform
an Index Search or Instant ReView.
The position of " " in relation to "B"
(Beginning) or "E" (End) shows you
where you are on the tape.
** SUPERIMPOSE must be set to
ON, or the indicator will not
appear (
੬
pg. 21).
Next-Function Memory
The Next Function Memory “tells” the VCR what to do after
rewinding.
* Before continuing, ensure that the VCR is in stop mode.
a– For Automatic Start Of Playback After Tape Rewind . . .
. . . press REW, then press PLAY within 2 seconds.
b– For Automatic Power Off After Tape Rewind . . .
. . . press REW, then press POWER within 2 seconds.
c– For Automatic Timer Standby After Tape Rewind . . .
. . . press REW, then press TIMER within 2 seconds.
B E + + +
1 2
4 5
3
6
8
0
7 9
2 2
q 5 / 8 6
FF REW
PLAY
POWER
POWER
FF
REW
PLAY
TIMER
PLAYBACK AND RECORDING FEATURES (cont.)
AV COMPU LINK Playback
Your VCR is compatible with JVC’s AV COMPU LINK compo-
nents, including amplifiers, receivers, and televisions.
MAKE CONNECTION
1
Connect your VCR to an AV COMPU LINK component
as shown in the illustration on page 25.
• The AV COMPU LINK cable is a mono 3.5 mm mini-
plug to mono 3.5 mm mini-plug connector.
TURN ON THE VCR
2
Press POWER.
ACCESS MAIN MENU
SCREEN
3
Press MENU.
ACCESS FUNCTION SET
SCREEN
4
Press CH 5∞ or SHUTTLE PLUS 5∞ to place the arrow
next to “FUNCTION SET”, then press OK.
SHUTTLE PLUS
MENU
OK
OK
MENU