beautypg.com

Receiving radio broadcasts, Tuning in stations manually, Press fm/am to select the band (fm or am — mw/lw) – JVC RX-6010RBK EN User Manual

Page 19: Using preset tuning

background image

16

Receiving Radio Broadcasts

You can browse through all the stations or use the preset function to go immediately to a particular station.

2. Press MEMORY.

“CH-” appears and the channel number position starts flashing
on the display for about 5 seconds.

3. Press FM/AM PRESET

5/ to

select a channel number while the
channel number position is
flashing.

Note:

You can use the 10 keys on the remote control to select the
preset number. When using the 10 keys, be sure that they are
activated for the tuner, not for the CD and others. (See page 29.)

4. Press MEMORY again while the

selected channel number is flashing
on the display.

The selected channel number stops flashing.
The station is assigned to the selected channel number.

5. Repeat steps 1 to 4 until you store all the stations

you want.

To erase a stored preset station
Storing a new station on a used number erases the previously stored
one.

Tuning in Stations Manually

On the front panel ONLY:

1. Press FM/AM to select the band

(FM or AM — MW/LW).

• Each time you press the button, the band

alternates between FM and AM (MW/LW).

2. Press FM/AM TUNING

5/ until

you find the frequency you want.

• Pressing FM/AM TUNING

5 increases

the frequency.

• Pressing FM/AM TUNING

∞ decreases

the frequency.

Notes:

• When you hold FM/AM TUNING

5

/

in step 2, the frequency

keeps changing until a station is tuned in.

• When a station of sufficient signal strength is tuned in, the TUNED

indicator lights up on the display.

• When an FM stereo program is received, the STEREO indicator

also lights up.

Using Preset Tuning

Once a station is assigned to a channel number, the station can be
quickly tuned. You can preset up to 30 FM and 15 AM (MW/LW)
stations.

To store the preset stations

Before you start, remember...
• There is a time limit in doing the following steps. If the setting is

canceled before you finish, start from step 1 again.

On the front panel ONLY:

1. Tune in the station you want to preset (see

“Tuning in Stations Manually”).

If you want to store the FM reception mode for this station,
select the FM reception mode you want. See “Selecting the FM
Reception Mode” on page 17.

FM/AM TUNING

FM/AM

L

SPK

TUNED

VOLUME

ANALOG

R

L

CH-

SPK

TUNED

VOLUME

ANALOG

R

MEMORY

L

CH-

SPK

TUNED

VOLUME

ANALOG

R

L

CH-

SPK

TUNED

VOLUME

ANALOG

R

MEMORY

FM/AM PRESET

L

SPK

VOLUME

ANALOG

R

EN08-20.RX-6010&6012R[B]_f

01.1.9, 6:39 PM

16