Specifications, English – JVC RX-6012VSL User Manual
Page 32
29
English
Specifications
Amplifier
Output Power
At Stereo operation:
Front channels:
100 W* per channel, min. RMS, both channels driven into 8
Ω
at
1 kHz with no more than 0.9% total harmonic distortion.
(IEC268-3/DIN)
At Surround operation:
Front channels:
100 W* per channel, min. RMS, driven into 8
Ω
at 1 kHz with no
more than 0.8% total harmonic distortion.
Center channel:
100 W*, min. RMS, driven into 8
Ω
at 1 kHz, with no more than
0.8% total harmonic distortion.
Rear channels:
100 W* per channel, min. RMS, driven into 8
Ω
at 1 kHz, with
no more than 0.8% total harmonic distortion.
(* Measured on AC 110 V, 127 V, 220 V and 240 V)
Audio
Audio Input Sensitivity/Impedance (1 kHz):
CD, TAPE/CDR, TV SOUND, VCR, DVD: 220 mV/47 k
Ω
Audio Input (DIGITAL IN)* :
Coaxial: DIGITAL 1 (DVD):
0.5 V (p-p)/75
Ω
Optical: DIGITAL 2 (CD):
–21 dBm to –15 dBm (660 nm ±30 nm)
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround
(with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).
Audio Output Level:
TAPE/CDR, VCR:
220 mV
Signal-to-Noise Ratio (’66 IHF/DIN):
CD, TAPE/CDR, TV SOUND, VCR, DVD: 87 dB/67 dB
Frequency Response (8
Ω
):
CD, TAPE/CDR, TV SOUND, VCR, DVD: 20 Hz to 20 kHz (±1 dB)
Tone Control:
Bass (100 Hz):
±10 dB
Treble (10 kHz):
±10 dB
Video
Video Input Sensitivity/Impedance:
Composite video:
VCR, DVD:
1 V (p-p)/75
Ω
Video Output Level:
Composite video:
VCR, MONITOR OUT:
1 V (p-p)/75
Ω
Synchronization:
Negative
Signal-to-Noise Ratio:
45 dB
EN25-30.RX-6010&6012[US]_f
00.12.20, 2:24 PM
29