JVC DR-MH220SE - Manual (Page 38)

38
Timer Recording with
S
HOW
V
IEW
® System
This system makes programming timer recordings
very simple. Most TV guides publish S
HOW V IEW
programming numbers with their program details.If
you want to make a timer recording of a program, you
just input the corresponding S
HOW V IEW programming
number. The date, start, stop and channel settings are
made automatically. All you have to do is tell the
recorder the recording mode, and whether it’s a once-
only recording, or a regular recording.
Up to 16 timer programs can be stored in the
recorder.
S HOW V IEW is a registered trademarks of Gemstar
Development Corporation.
The S
HOW V IEW System is manufactured under license
from Gemstar Development Corporation.
1. Press S HOW V IEW button.
The S HOW V IEW menu will appear.
Press S HOW V IEW button again to exit the menu.
[Number] Enter the S HOW V IEW programming
number.
2. Use the number buttons then press ENTER to
enter the S HOW V IEW programming number.
To check the programming, the Timer Record
menu will appear.
If you make a mistake before pressing ENTER,
press CLEAR repeatedly to delete number one
by one then correct it.
3. You can change the information as required using
b / B / v / V (Media, VPS/PDC, etc.)
Refer to “Timer Recording” on previous page.
4. Choose a record mode (XP, SP, LP, or EP).
5. Press ENTER, the program will be memorized by
the recorder.
To check the programming, the Timer Record List
will appear.
Check field’s “Rec. OK” on the Timer Record List
indicates that the timer recording is programmed
correctly.
6. Press RETURN (O) to exit the Timer Record
menu.
7. Make sure that you load a recordable disc for DVD
recording and press STANDBY/ON to switch your
unit to Standby.
Notes:
Timer recordings cannot be made if the recorder is
turned on.
Even if the timer is set and if the recorder is turned
on, the caution message appears on the TV screen
before 10, 5, and 1 mimutes from starting time.
You cannot change the operation mode to DVD
from HDD (to HDD from DVD) in timer recording.
You cannot use the Timeshift function in timer
recording.
TV channels cannot be changed in timer recording.
You can stop a timer recording in progress.
Press STOP and the confirm message will appear.
Press ENTER to stop the recording or
press RETURN (O) to continue the recording.
When the end time of one recording and start time
of another are the same, the other recording’s start
portion will be cut off. So, set the end time of the
first program to a few minutes early.