JBL CS680 (230V) - Manual (Page 7)

7
English
SUBWOOFER CONTROLS
Rear Panel
AC 220V-230V
50Hz-60Hz
220 Watts
PHASE
CS80SUB/230
¡
™
£ ¢
∞
§
ᕡ Subwoofer-Level Control
ᕢ Phase Switch
ᕣ LFE Input
ᕤ Line-Level Inputs
ᕥ Power Indicator LED
ᕦ Power Switch
Subwoofer Connections
If you have a Dolby
® Digital or DTS ® receiver/processor with a
low-frequency-effects (LFE) or subwoofer output:
SUBWOOFER OR
LFE OUTPUT
RECEIVER/PROCESSOR
4.5m (15')
Subwoofer
cable included
NOTE: If your receiver/processor has only one sub out, you may use
either the L or R input.
If your receiver/processor does not contain a Dolby Digital or DTS
processor but has a subwoofer output:
4.5m (15')
Subwoofer cable
included
RECEIVER/PROCESSOR
Important!
Whenever changing cables, pulling plugs, etc., ALWAYS TURN OFF
ALL EQUIPMENT, including the subwoofer.
31079_CS680_OM_Eng 13/11/06 9:53 Side 7