JVC HR-J235EK - Manual (Page 16)

16
1 2
4 5
3
6
8
0
7 9
1
3
2
PLAYBACK (cont.)
6
q
Index Search
Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the
recorder is in the Stop mode.
ACTIVATE INDEX SEARCH
1
Press PUSH JOG or (™ or £). “™ 1” or
“£ 1” is displayed on screen and search begins in
the corresponding direction.
● To access index codes 2 through 9, press PUSH JOG
or repeatedly until the correct index number is
displayed.
Ex.: To locate the beginning of B from the current
position, press PUSH JOG twice.
To locate the beginning of D from the current
position, press PUSH JOG
once.
● When the specified index code is located, playback
begins automatically.
£ 2
A B C D E F
–2 –1 1 2 3
Current position
Index number
Tape Remaining Time
DISPLAY REMAINING TIME
1
Press DISPLAY until the time remaining on the tape
appears.
● By pressing the DISPLAY button, you can change the
display to show the counter reading, tape remaining
time, or clock time.
NOTE:
● Depending on the type of tape used, there may be times
when the tape remaining time reading may not appear right
away, or is not correct. "- - : - -" may sometimes appear, or the
display may blink on occasion.
PUSH JOG
DISPLAY
% %
% %
%
%