JVC GV-PT2U - Manual (Page 52)

52
REQUIRED HARDWARE
q Bi-Directional 25-pin printer interface
q 486DX2 or higher CPU
OPERATING ENVIRONMENT
q Personal computer with Microsoft
ா* Windowsா* Operating System Version 3.1
(also verified to run with Microsoft
ா Windowsா 95)
* Microsoft
ா and Windowsா are trademarks of the Microsoft Corporation registered in the
United States and other countries.
q 16 MB RAM or more
q At least 8 MB available hard disk space
q Color display capable of handling at least 640 x 480 dots and 256 colors
(Recommended: true color 24-bit)
q Windows
ா-compatible mouse connected to PC
q 3.5” 1.44MB floppy disk drive
q PC which allows setting of Parallel Port to “Bi-Directional” or “Enhanced Parallel Port” mode.
q BIOS setting (with EPP or Bi-Directional setting) (see below)
BIOS SETTING
The GV-PT2 Driver & Capture Utility Software is designed to use a two-way communications
interface as a prerequisite in the environment of Windows
ா. It runs when the parallel-port mode
is set to EPP or Bi-Directional (represented as PS/2 Exchange mode or Extension mode in some
PCs).
The initial setting of some PCs may not be EPP or Bi-Directional. In this case, set the mode to
EPP or Bi-Directional using the PC’s set-up utility. Refer to your computer’s user manual for
details.
Some PCs capable of two-way communications may not provide any setup indication for EPP or
Bi-Directional. In this case, consult the manufacturer of your computer.
INTRODUCTION