John Lewis JLCH200 - Manual (Page 14)

Problem Possible cause Solution
There is no voltage in the mains
socket (try to connect another
appliance into it). Call an electrician.
If after following these instructions you do not
resolve the fault with your appliance please
refer to the "Repairs - After Sales Service".
Replacing the lamp
1. Disconnect the mains plug from the mains
socket.
2. Replace the used lamp with a new lamp of
the same power (the maximum power is
shown on the lamp cover).
3. Connect the mains plug to the mains
socket.
4. Open the lid. Make sure that the lamp
comes on.
Warning! Do not remove the lamp
cover at the time of replacement.
Do not operate the freezer if the lamp
cover is damaged or missing.
14