John Lewis JLBIWD 1400 - Manual (Page 8)

8
Building-in
This appliance has been designed to be built into the
kitchen furniture. The recess should have the
dimensions shown in picture A.
When installing the appliance into the kitchen furniture
ensure, if possible, the hoses are placed in either of the
two recesses on the back of the appliance. This will
help to prevent the hoses from becoming kinked or
trapped. Fig. AB.
Preparation and assembly of
the door
The machine is originally pre-arranged for the assembly
of a door opening from right to left.
In this case it is sufficient to screw in the hinges (1) and
the counter-magnet (6) provided with the appliance, at
the right level (Fig. B).
P0965
820 min
570 min.
600
596
416
176,5
818
541 195
490
160
120
90
8
515
165 A
600
a) Door
The dimensions of the door should be:
- width
595-598 mm
- thickness 16-22 mm
The height (C-Fig. C) depends on the height of the
adjacent furniture's base.
b) Hinges
To mount the hinges it is necessary to drill two holes
(dia. 35 mm, depth 12.5-14 mm depending on the
depth of door furniture) on the inner side of the door.
The distance between the holes hobs fixing centres
must be 416 mm.
The distance (B) from upper edge of the door to the
centre of the hole depends on the adjacent furniture's
dimensions.
The required dimensions are given in the picture C.
The hinges will be fixed to the door by means of
screws for wood (2-Fig. B) supplied with the appliance.
35 Ø 12.5-14 depth
16-22
B
C
22+1,5
595-598
416
P0422S
C
4
1 2
3
6
1
2
3
P0982
7
B
5