JVC GR-DVL9000 - Manual (Page 59)

EN
59
1 CONFIRM POWER-OFF STATUS
Make sure the camcorder’s power is off.
2 CONNECT CAMCORDER TO TV OR VCR
Connect as shown in the illustration (
੬
pg. 58).
If Using A VCR . . . go to step 3.
If not . . . go to step 4.
3 CONNECT VCR OUTPUT TO TV INPUT
Refer to your VCR’s instruction manual.
4 TURN ON POWER
Turn the Power Dial to “PLAY” while pressing
down the lock button located on the dial and
turn on the TV/VCR.
5 SELECT TV’S VIDEO MODE
Set the TV to the channel or mode appropriate
for video playback.
To choose whether or not the following displays
appear on the connected TV . . .
• Date/Time, Time Code
.... set to “ON” or “OFF” in the Playback Menu
(
੬
pg. 56).
• Playback Sound Mode Display
.... set the Power Dial to “ M ”, press the MENU
button, and set “ON SCREEN” in the Date/
Time Menu (
੬
pg. 13) to “ON” or “OFF”.
Then set the Power Dial back to “PLAY”.
NOTES:
● Never connect any other VIDEO/AUDIO cable
than the provided VIDEO/AUDIO cable to the
camcorder’s AV OUT connector.
● When using the provided DC cord, VIDEO/
AUDIO cable, S-VIDEO cable or editing cable,
make sure you connect the end of the cable with
the core filter to the camcorder. The core filter
improves performance of equipment.
● If TV/VCR is equipped with only one audio
connector, use a conversion plug (commercially
available).
● Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
● To keep the camcorder's display from appearing
on the TV screen during playback, press the ON/
OFF button for longer than 1 second.
● While the VIDEO/AUDIO cable is connected to
the AV OUT jack, sound cannot be heard from
the speaker.