JVC XV-LTR1 - Manual (Page 17)

Getting started
15
Ge
ttin
g s
ta
rte
d
You can enjoy high-quality audio by connecting the unit's audio output to your amplifier or receiver.
• Connect the unit's AUDIO OUT to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or receiver.
You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks to the digital input of an
amplifier, MD, etc. by using a coaxial digital cable (optional). The digital audio signal from a disc is directly transferred. If
you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by using an optional digital
cable, you can enjoy high-quality surround sound.
When you make the digital connection, we recommend also to make the analog connection, because, depending on
discs, no signal may be output from the DIGITAL OUT.
To connect to an audio amplifier or receiver
To connect to audio equipment with a digital input
NOTES
• When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the “DIGITAL AUDIO OUTPUT”
setting in the “AUDIO” page of the preference display correctly according to the connected audio equipment. If the “DIGITAL
AUDIO OUTPUT” is not set correctly, loud noise may be generated from speakers, causing damage to your speakers. See
“DIGITAL AUDIO OUTPUT” on page 37.
• With the digital connection, the COMPRESSION settings in the AUDIO page of the preference display are invalid. Settings for
these items must be made from the decoder.
DIGITAL OUT
PCM / STREAM
COAXIAL
COMPONENT
Y P B P R
VIDEO OUT
AUDIO
RIGHT
LEFT
IN
Amplifier or receiver
Audio cable
(not supplied)
White
Red
The unit
White Red
AUDIO OUT
S-VIDEO VIDEO RIGHT LEFT
AUDIO
RIGHT
LEFT
IN
OPTICAL
COAXIAL
DIGITAL
IN
Digital equipment
Audio cable
(not supplied)
White
Red
The unit
White Red
Coaxial digital cable
(not supplied)
DIGITAL OUT
PCM / STREAM
COAXIAL
VIDEO OUT
AUDIO OUT
COMPONENT
VIDEO
Y P B P R
S-VIDEO RIGHT LEFT
/75(1*ERRN 3DJH 7XHVGD\ -XO\ 30