Using sleep timer, Timer priority – JVC CA-HXZ9 User Manual
Page 30
25
English
SLEEP 10
SLEEP 60
SLEEP 30
SLEEP 20
Canceled
SLEEP 120
SLEEP 90
To turn on or off Recording Timer after its setting
is done
1
Press CLOCK/TIMER repeatedly until
“REC” appears on the display.
The REC (Recording Timer) indicator starts
flashing on the display and the
(Timer)
indicator remains lit.
2
To turn off the Recording Timer, press
CANCEL/DEMO.
The REC (Recording Timer) indicator goes
off from the display (“REC OFF” appears on
the display for about 2 seconds).
The Recording Timer is canceled, but the setting for the
Recording Timer remains in memory.
Or
To turn on the Recording Timer, press
SET/DISPLAY.
“OK ” appears on the display for about 2
seconds.
The settings you have done are shown on the
display in sequence for your confirmation.
Using Sleep Timer
With Sleep Timer, you can fall asleep to music. You can set
Sleep Timer only while the unit is turned on.
How Sleep Timer actually works
The unit automatically turns off after the specified time
length passes.
On the remote control ONLY:
1
Press SLEEP.
The time length until the shut-off time
appears and the SLEEP indicator starts
flashing on the display.
• Each time you press the button, the time length changes
as follows:
• If the built-in clock has not been set, “CLOCK ADJUST”
appears on the display.
2
Wait for about 5 seconds after specifying the
time length.
The SLEEP indicator flashes slowly until Sleep Timer
works.
To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time (minute) until the
shut-off time appears for about 5 seconds.
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly so that the
SLEEP indicator goes off.
• Sleep Timer is also canceled when you turn off the unit.
Timer Priority
Since each timer can be set separately, you may wonder what
happens if the settings for these timers overlap.
Below are some examples.
Recording Timer has priority over Daily Timer and Sleep Timer.
• If Daily Timer is set to come on while Recording Timer is
operating, Daily Timer will not come on at all.
• If Recording Timer is set to come on while Sleep Timer is
operating, Sleep Timer will be canceled.
Recording Timer
Sleep Timer
Recording Timer
Daily Timer
CLOCK
/ TIMER
CANCEL / DEMO
SET /
DISPLAY
SLEEP
6:00
6:30
7:00
7:30
does not work.
21:00
21:30
22:00
22:30
canceled.
EN20-25.CA-HXZ9[UW]f.p65
03.1.30, 11:00 AM
25