JVC HR-A630EK - Manual (Page 15)

15
q 6
NTSC Playback
Your video recorder is equipped with NTSC circuitry that can
play back NTSC tapes.
LOAD A CASSETTE
1
Insert a cassette recorded in NTSC.
START PLAYBACK
2
Press PLAY. “NT” appears on the display panel.
● Some TVs shrink the picture vertically and place
black bars at the top and bottom of the screen. This is
not a malfunction on the part of either the video
recorder or the TV.
● The picture may roll up and down. This can be
corrected using the V-HOLD control found on some
TVs. (This cannot be corrected if the TV does not
have a V-HOLD control.)
● The counter and elapsed tape time readings will be
incorrect.
● During search, still, or frame-by-frame playback, the
picture will be distorted, and there may be a loss of
colour.
● Depending on the type of TV, the top and bottom
portions of superimposed displays may be cut off
during NTSC playback.
1 2
4 5
3
6
8
0
7 9
1
3
2
AUDIO MONITOR
Soundtrack Selection
Your video recorder is capable of recording three
soundtracks (HI-FI L, HI-FI R and NORM) and will play
back the one you select.
During Playback
Pressing AUDIO MONITOR on the remote control
changes the soundtrack being played back as follows:
TRACK
USE
Recorder's Front Panel
L + R For Hi-Fi stereo tapes
L For main audio of Bilingual tapes
R For sub audio of Bilingual tapes
NORM For audio-dubbed tapes
L + R + NORM For audio-dubbed tapes
NOTES:
● "L + R" should normally be selected. In this mode, Hi-Fi
stereo tapes are played back in stereo, and the NORM
track is played back automatically for tapes with only
normal audio.
● For instructions on recording NICAM stereo and
bilingual programmes, refer to page 18.
● Bilingual programmes are not currently broadcast in the
U.K.
PLAY
PLAY