JVC HR-XVC26U - Manual (Page 12)

Filename [XVC27U_06Index.fm]
Masterpage:Left+
12
EN
Page 12 13 January 2004 1:57 pm
INDEX (cont.)
ON-SCREEN DISPLAY (VCR deck)
If you press ON SCREEN on the Remote when “SUPERIMPOSE” is set to “ON” (
੬
pg. 75), various operational
indicators appear on the TV screen.
For On-screen display for DVD deck, refer to “Using the on-screen bar” (
੬
pg. 48).
A Operation Mode Indicators
B Tape Speed (SP/EP)
C Tape Position Indicator
The tape position indicator
appears on the TV screen
when you press REW (3)
or FF (5) from the Stop
mode or perform an Index
Search. (
੬
pg. 30) The
position of “q” in relation to
“B” (beginning) or “E” (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
D Index number ੬ pg. 30
E Tape Remaining Time Indicator ੬ pg. 35
F Counter Display
G Audio Mode Display
੬ pg. 32
H SAP Indicator ੬ pg. 35
I Stereo Program Indicator ੬ pg. 35
J Day/Clock Display
K Channel Position Number/Auxiliary Input
Indicator (F-1)
L “Cassette Loaded” Mark
Beginning End
To recall an indication
A Press ON SCREEN.
● All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE if in the Record Pause
mode, remain on the screen.
B Press ON SCREEN again to clear the display.
● The RECORD/PAUSE indication remains on the screen.
XVC27U_06Index.fm Page 12 Tuesday, January 13, 2004 1:57 PM