Jacuzzi Whirlpool Spa - Manual (Page 7)

www.clearcreekspas.com
OPERATION
Operating Instructions
Now that your spa is in place, you are probably eager to take advantage of its unique designed-in features—
especially the famous Jacuzzi ® hydromassage performance. Besides being a beautiful addition to your indoor decor
or outdoor landscaping, your Jacuzzi Whirlpool Bath spa will provide you with the ultimate in spa pleasure. Familiarize
yourself with the operation of the electronic control panel, as described on pages 7-8 of this manual. Access under
the spa (behind the skirts) is required only to drain the water.
WARNING: Do not turn ON power to the spa unless it is filled with water to the normal water level. Refer to water
line indicator mark on skimmer frame. Whenever the power is ON, the system may activate even though no
controls are operated. If the spa’s motor/pump is actuated when there is not sufficient water in the unit, the
circulation pump and heater could be irreparably damaged. Not heeding this caution will nullify the warranty. In
addition to damaging the unit, operating the spa with insufficient water could cause a fire.
Initial Instructions
• Using a garden hose, fill the spa with water to the
water line indicator mark on the skimmer frame. (Re-
fer to information on using the Water Rainbow spout if
desired.)
• At the house service panel, turn ON the circuit breaker
or switch that controls the electrical service to your
spa. Make sure there is no other appliance on that
circuit.
5