Spot exposure control, White balance adjustment, Spot exposure control white balance adjustment – JVC GR-D775U User Manual
Page 39: Spot exposure, Pg. 39), White balance indicator
EN
39
FEATURES FOR RECORDING
MasterPage: Start_Right
ADV
ANCED FEA
TURES
Selection of a spot metering area enables
more precise exposure compensation.
1
Set the Power Switch to “REC”.
2
Set the recording mode to “
M”.
3
Press
twice so that the Spot Exposure
Control indicator “
” appears.
●
A spot metering area frame appears at the
center of the LCD monitor/viewfinder.
4
Press SET.
●
Spot Exposure Control is engaged.
●
Exposure is adjusted to make the brightness of
the selected area most appropriate.
To lock the iris
3, press and hold SET over 2
seconds. The “
” indication appears and the
iris is locked.
To cancel Spot Exposure Control
Press
once so that the “
” indicator
disappears.
NOTES:
●
Depending on the shooting location and
condition, optimum result may not be attained.
●
“STROBE” in “EFFECT” cannot be used with
Spot Exposure Control.
The white balance refers to the correctness of
color reproduction under various lighting. If the
white balance is correct, all other colors will be
accurately reproduced.
The white balance is usually adjusted
automatically. However, more advanced
camcorder operators control this function
manually to achieve a more professional color/
tint reproduction.
To change the setting
Set “W. BALANCE” to the desired mode.
(
●
The selected mode indicator except “AUTO”
appears.
[AUTO]: White balance is adjusted
automatically.
MWB: Adjust the white balance
manually when shooting under various types
of lighting. (
FINE: Outdoors on a sunny day.
CLOUD: Outdoors on a cloudy day.
HALOGEN: A video light or similar type
of lighting is used.
Spot Exposure Control
White Balance Adjustment
GR-D775US_EN.book Page 39 Friday, December 15, 2006 11:14 AM