JVC GC-S5 - Manual (Page 64)

64
d Setup
ADVANCED FEATURES
Date and Time
This setting specifies the date and time. If you remove the battery for more
than 5 minutes at a time, the date and time setting reverts to the initial setting
(’98.01.01 12:00:00 AM). You must then reset the date and time.
Date:
Automatic calendar (two-digit display)
Time: 12-hour format (noon shown as 12:00:00 PM)
1 In the SETUP screen, select
“DATE/TIME”and press the
[MENU/EXE] button.
2 Press the [ 4 ] button until the
digits you want to set start
flashing.
• Each time you press the [4] button,
the flashing digits change as follows:
Year
→
Month
→
Day
→
Hour
→
Minute.
3 Use the [ 5 ] or [ 6 ] button to
set the number.
4 When you have repeated
steps 2 and 3 and have set
the seconds, press the
[MENU/EXE] button.
• This completes the date and time
settings.
• The time display begins counting
from zero “00” seconds.
• The “SETUP” screen reappears.
POWER MENU / EXE DISP T
POWER MENU / EXE DISP T
DIGITAL
POWER MENU / EXE
DATE [ 9 8 ] 0 1 . 0 1
T I M E 1 2 : 0 0 : 0 0 A M
O K
<
E X E
>