JVC RX-554VBK - Manual (Page 14)

11
Basic Operations
The following operations are commonly used when you play any sound source.
Turning the Power On and Off
On the front panel:
To turn on the power, press POWER.
The STANDBY lamp goes off. The name of the current
source (or station frequency) appears on the display.
To turn off the power, press POWER again.
The STANDBY lamp lights up.
From the remote control:
To turn on the power, press AUDIO.
The STANDBY lamp goes off. The name of the current
source (or station frequency) appears on the display.
To turn off the power, press AUDIO again.
The STANDBY lamp lights up.
Selecting the Source to Play
On the front panel:
1. Press SOURCE so that the Control % % % % % / fi fi fi fi fi buttons
work for selecting the source.
The lamp above the button lights up.
2. Press Control % % % % % / fi fi fi fi fi until the source name you want
appears on the display.
From the remote control:
Press one of the source buttons directly.
CD* Listen to the CD player.
TAPE* Listen to the cassette deck.
TUNER/BAND* Listen to the radio. Each time you press
the button, the band alternates between
FM and AM.
VCR View the playback picture from the VCR.
VIDEO View the video component connected to
the VIDEO jacks.
PHONO* Listen to a record.
Note:
When you press one of the
source buttons on the remote
control marked with an asterisk
(*), the receiver automatically
turns on.
Current source name appears Current volume
level is shown here
SOURCE
AUDIO
CD
TAPE
TUNER/
BAND
VCR
VIDEO
PHONO
VOLUME
MUTE TUNED SLEEP SEA 3D-PHONIC
AUTO STEREO PRO LOGIC 3CH LOGIC HALL LOUDNESS
DAP
L
VOLUME
R
CH- MHz
kHz
STANDBY
POWER
RX-554VBK(J)_0117-001B_En.01-19 98.1.6, 11:35 AM 11