JVC KS-F315EE - Manual (Page 4)

4
ENGLISH
1
Turn on the power.
2
Select the band (FM1, FM2, FM3
or AM).
You can select any one of FM1, FM2, and
FM3 to listen to an FM station.
3
Start searching a station.
When a station is received, searching stops.
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in a particular frequency manually:
1 Press FM or AM to select the band.
2 Press and hold
or until “M” starts flashing on the display.
Now you can manually change the frequency while “M” is flashing.
3 Press or repeatedly until the frequency you want is reached.
• If you hold down the button, the frequency keeps changing (in 50 kHz intervals (87.5 - 108
MHz), in 30 kHz intervals (65 - 74 MHz) for FM and 9 kHz intervals for AM — MW/LW)
until you release the button.
RADIO OPERATIONS
Listening to the radio
To search stations
of lower
frequencies.
To search stations
of higher
frequencies.
Note on One-Touch Operation:
When you select a band in step 2 below, the power automatically comes on. You
do not have to press this button to turn on the power.
Note:
When a cassette is in the cassette compartment, you cannot select the tuner. Be sure
to eject the cassette from the cassette compartment to listen to the radio.
/I/ATT
FM1 FM2
FM3
F M
FM1 and FM2: 87.5 - 108 MHz
FM3: 65 - 74 MHz
A M AM
1
2 3
KS-F315[EE]/f 4