Recording features, Engage tv mode, Select channel for viewing – JVC HR-J4006UM User Manual
Page 53: Reset counter to zero, Display elapsed time on screen, Record one program while watching another, Display elapsed recording time

EN
19
Record One Program While
Watching Another
Recording
Features
ENGAGE TV MODE
1
During recording...
● Press TV/VCR. The VCR's VCR indicator goes out. (If
you are using the RF connection (
੬
pg. 4) to view
the output from your VCR, the TV broadcast being
recorded disappears.)
● If you are using the AV connection (
੬
pg. 4) to view
the output from your VCR, change the TV's input
mode from AV to TV.
SELECT CHANNEL FOR
VIEWING
2
Use the TV’s channel selector to set the channel you
want to watch.
RESET COUNTER TO ZERO
1
Before recording starts, press C.RESET. The counter
resets to zero and displays the exact elapsed time as the
tape runs.
DISPLAY ELAPSED TIME ON
SCREEN
2
During recording, press OSD at any time to see the
elapsed time.
All indications corresponding to the current status of the
VCR are displayed for 5 seconds. The counter display
remains on the screen indicating the elapsed time.
Press OSD again to remove the display.
● Make sure "SUPERIMPOSE" is set to "ON" (
੬
pg. 18).
● The indications are not recorded.
● Each time you press OSD, the indication on the front
display panel will also change as follows: counter
reading
= channel number = clock time. (Channel
number is not displayed during playback.)
Display Elapsed Recording
Time
1
2
3
4
5
0
6
7
8
9
••
••
1
2
4
3
OSD
TV/VCR
C.RESET