JVC CA-UXEP25 - Manual (Page 30)

27 27
4 Set the volume.
• “SET OK” appears on the display fol-
lowed by the timer settings you have
entered.
3 Turn off the System (on standby) if
you have set the timer with the System
turned on.
STANDBY/ON
Display is turned off. The STANDBY lamp
blinks slowly until the setting time comes.
To turn off the Timer after its setting is done
Since Daily Timer is activated at the same time
everyday, you may need to cancel it on some
particular days.
1 Select the Timer setting.
2 Turn off the Timer.
The timer indicator turns off on the display
and Daily Timer is canceled.
To turn on the Timer again, select “Current timer
settings ” in step 1 and press SET/RESUME.
Canceled (normal display)
Current timer settings Timer Setting
Clock setting (see page 21)