JBL radial micro - Manual (Page 5)

MENU
Remote functionality
Volume Up/Down and Mute will work with all devices. Other functions work only when an iPod is docked.
volume down
play/pause
forward
scroll up
menu
volume up
mute
reverse
scroll down
select
Before proceeding, make sure the iPod is securely docked to your JBL product.
Note: JBL Radial Micro must be turned on for remote control to operate your audio device.
Navigation Control Mode
Turn iPod on: Press any button on the remote control to wake the iPod.
Turn iPod off: Press and hold the Play/Pause button for two seconds.
Bring up iPod menu: Press the Menu button
Scroll up: Press the Scroll Up button.
Scroll down: Press the Scroll Down button.
Go to previous menu: Press the Menu button.
Select menu/track/feature: Press the Select button.
Music control mode
Play a track: Press the Play/Pause button. Note: If the iPod is at the Main Menu, pressing Play/Pause
will cause the iPod to
start playing all of its music.
Pause a track: Press the Play/Pause button while a song is playing.
Skip to next track: Press the Forward button.
Skip to previous track: Press the Reverse button.
Fast advance track: Press and hold the Forward button.
Fast reverse track: Press and hold the Reverse button.
Increase volume: Press the Volume Up button.
Decrease volume: Press the Volume Down button.
Mute: Press the Mute button.
Go to previous menu: Press the Menu button.
Select menu/track/feature: Press the Select button.
Photo/Video control mode
Play slideshow/video: Press the Play/Pause button.
Skip to next photo/video: Press the Forward button.
Skip to previous photo/video: Press the Reverse button.
Increase volume: Press the Volume Up button.
Decrease volume: Press the Volume Down button.
Mute: Press the Mute button.
Note: In order to wake or turn your iPod on when docked in JBL Radial Micro, JBL Radial Micro power button (#1)
must be on.
Photo/Video control mode
The JBL remote’s battery should last a year under normal usage. To replace the battery, release the battery cover on the back
of the remote and replace the old battery with a CR2032-type battery or equivalent.
Dock Adapters
For detailed information regarding selection, installaton, and removal of dock adapters, visit www.jbl.com
To remove an adaptor, insert a flat-head screw driver (sold separately) into the slot on the back of the adapter
and lift up.