JVC GC-QX3 - Manual (Page 47)

EN
47
DR Pro-Still (Wide Range Mode)
The camera can expand its apparent dynamic range by combining different exposures of an extremely high
contrast subject.
This mode uses the self timer to shoot a still picture. Use a tripod to prevent problems caused by shaky
hands.
1 Turn the Power dial to “M”.
•Hold the Lock button down while turning the
Power dial.
2 Select “DR PRO S” with the MODE switch.
•“DR PRO S” appears on the LCD panel.
3 Confirm that the self timer is set to “1 second“.
4 Point the lens at the subject, position yourself,
and half-press the Shutter button.
•To display the image on the LCD screen
while shooting, press the DSP button.
5 Press the Shutter button all the way to take
the picture.
•The shoot standby lamp (green) goes off
when the shooting has finished.
NOTES:
● Due to large memory files created when shooting
a picture of uncompressed quality in this mode, it
is recommended to use a Memory card with the
capacity more than 16MB.
● It takes a few seconds until the shooting finishes
because this mode uses the exposure twice. Do
not move the object and the camera until the
shooting finishes completely.
3
1
OFF
M
4 SET
V
2
4,5