JVC CA-MXJ10 - Manual (Page 7)

4
CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Connecting the FM Antenna
A. Using the Supplied Wire Antenna
The FM Wire Antenna provided can be connected to a FM 75 Ω
COAXIAL as temporary measure.
Extend the supplied wire antenna horizontally.
B. Using the Standard Type Connector
(not supplied)
A standard type connector (IEC or DIN 45325) should be connected to
the FM 75
Ω
COAXIAL terminal.
CAUTION: To avoid noise, keep antennas away from metallic parts of the System, connecting
cord and the AC power cord.
Connecting the AM (MW/LW) Antenna
Before attaching a 75 ohm coaxial lead (the kind
with a round wire going to an outside antenna),
disconnect the supplied FM Wire Antenna.
If reception is poor, connect the outside antenna. AM Antenna Wire (not supplied)
AM LOOP
GND
AM
EXT
ANTENNA
FM 75
COAXIAL
ANTENNA
FM 75
COAXIAL
GND
AM
EXT
A
B
AM LOOP
ANTENNA
FM 75
COAXIAL
GND
AM
EXT
AM LOOP
FM Wire Antenna
If reception is poor,
connect the outside
antenna.
Outside FM Antenna Wire
AM LOOP
GND
AM
EXT
ANTENNA
FM 75
COAXIAL
Turn the loop until you
have the best reception.
Snap the tabs on the
loop into the slots of
the base to attach the
AM Loop.
AM Loop Antenna
Note: Even when connect-
ing an outside AM antenna,
keep the indoor AM loop
connected.
EN01-28 MX-J10[B] 99.7.6, 10:38 AM 4