beautypg.com

JVC GR-D350EW User Manual

Page 34

background image

EDITING

34

EN

MasterPage: Left

It is also possible to copy recorded scenes from
the camcorder onto another video unit equipped
with a DV connector. Since a digital signal is
sent, there is little, if any, image or sound
deterioration.

To use this camcorder as a player

1

Make sure all units are turned off.

2

Connect this camcorder to a video unit

equipped with a DV input connector using a DV
cable as shown in the illustration.

3

Start playback on the camcorder. (

੬ pg. 21)

4

At the point you want to start dubbing, start

recording on the video unit. (Refer to the video
unit’s instruction manual.)

5

To stop dubbing, stop recording on the video

unit, then stop playback on this camcorder.

NOTES:

It is recommended to use the AC Adapter as

the power supply instead of the battery pack.
(

pg. 14)

● If a blank portion or disturbed image is played

back on the player during dubbing, the dubbing
may stop so that an unusual image is not dubbed.

● Even though the DV cable is connected correctly,

sometimes the image may not appear in step

4. If

this occurs, turn off the power and make
connections again.

When using a DV cable, be sure to use the

optional JVC VC-VDV204U DV cable.

To use this camcorder as a recorder

1

Make sure all units are turned off.

2

Connect this camcorder to a video unit

equipped with a DV output connector using a DV
cable as shown in the illustration.

3

Set the camcorder's Power Switch to

“PLAY”

.

4

Set

“REC MODE”

to

“SP”

or

“LP”

. (

੬ pg. 26)

5

Press the Recording Start/Stop Button to

engage the Record-Pause mode.

● The “

” indication appears on the screen.

6

Start playback on the player.

7

At the point you want to start dubbing, press

the Recording Start/Stop Button again to stop
dubbing. The

T

indication rotates.

8

Press the Recording Start/Stop Button again

to stop dubbing. The

T

indication stops rotating.

9

Press

8

to return to the normal playback

mode.

NOTE:

Digital Dubbing is performed in the sound mode
recorded on the original tape, regardless of the
current “SOUND MODE” setting.

(

pg. 24)

Dubbing To A Video Unit Equipped
With A DV Connector (Digital
Dubbing)

Core filter

To DV IN/OUT

DV cable (optional)

To DV IN/OUT

Video unit equipped with DV connector

DV IN

GR-D350EW.book Page 34 Friday, March 24, 2006 12:10 PM