JVC DR-MH200SE - Manual (Page 75)

Masterpage:Right+
EN
75
Filename [MH200SEU_12Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 75Wednesday, 25 May 2005 13:34
Manual Channel Set
Store channels that were not stored during Auto Set Up
(A pg. 17), Preset Download (A pg. 18) or Auto Channel Set
(A pg. 74).
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to select AINITIAL SET UPB, then press
G.
3
Press selection keys to select ATUNER SETB, then press G.
4
Press selection keys to select AMANUAL CH SETB, then press
ENTER. The Manual Channel Set screen appears.
5
Press selection keys to select AEDITB, then press ENTER.
6
Press selection keys
to select a blank
position in which you
want to store a
channel, then press
ENTER. The
Confirmation screen
appears.
7
Press selection keys
to select
ABANDB, then
press ENTER.
8
Press selection keys
to change the band
between CH (regular)
and CC (cable), then
press ENTER.
9
Press selection keys
to select
ACHB, then
press ENTER.
10
Press selection keys
to input the channel
number you want to
store.
● To enter the registered station name (A pg. 88), press
selection keys to select
AIDB, then press ENTER. Press
selection keys.
● For fine tuning adjustment, press selection keys to select
AFINEB, then press ENTER. Press F G to perform fine-tuning.
● When storing a channel that sends scrambled broadcasts,
press selection keys to select
ADECODERB, then press
ENTER. Press selection keys to set ADECODERB to AONB
( AOFFB is the default setting).
● When AL-2 SELECTB is set to AVIDEOB, AS-VIDEOB,
ASAT VIDEOB or ASAT S-VIDEOB, the ADECODERB setting
cannot be changed. (A pg. 65)
11
Press ENTER to enter new channel information. The
Confirmation screen appears.
12
Press SET UP or RETURN to close the Confirmation screen.
● To change positions, see AChange Station Channel PositionB
(A pg. 75).
● If you wish to set station names other than the ones registered
in your unit, see
ASet Stations (B)B (A pg. 76).
Delete A Channel
1
Perform steps 1 – 5 of AManual Channel SetB (A pg. 75).
2
Press selection keys to select the channel you want to delete.
3
Press CANCEL( L) to delete a channel. The channel next to
the cancelled one moves up one line.
● Repeat steps 2 – 3 as necessary.
4
Press SET UP or RETURN to close the Confirmation screen.
Change Station Channel Position
1
Perform steps 1 – 4 of AManual Channel SetB (A pg. 75).
2
Press selection keys to select AMOVEB, then press ENTER.
3
Press selection keys to select the channel you want to move,
then press ENTER.
4
Press selection keys to select the new channel position, then
press ENTER.
Example: If you moved the station in position 4 to position 2, the
stations originally in positions 2 and 3 each move down
one space.
● Repeat steps 3 – 4 as necessary.
5
Press SET UP or RETURN to close the Confirmation screen.
ATTENTION:
Guide Programme numbers are not set when channels are
stored manually. (A pg. 73,
AS HOW V IEW System Setup B)
(Example) To store in position 12.
The programme currently received on the
selected channel position appears behind
the confirmation screen.
< >
PR PR
01 C01 ----
02 02 CTEA
03 05 1000
04 C79 3SAT
05 01 9LIV
06 04 AB3
07 ----
08 ----
09 ----
10 ----
11 ----
12 ----
MOVE
INITIAL SET UP > MANUAL CH SET
EDIT RETURN
CH ID CH ID
2
----
INITIAL SET UP > MANUAL CH SET
BAND
CH
ID
FINE
DECODER
RETURN
CH
OFF
SELECT WITH @ THEN PRESS [ENTER] ENTER
SELECT
SET UP
EXIT
PRESS [SET UP] TO EXIT
< >
PR PR
01 C01 ----
02 02 CTEA
03 05 1000
12 ----
05 01 9LIV
06 04 AB3
07 ----
08 ----
09 ----
10 ----
11 ----
04 3SAT
< >
PR PR
01 C01 ----
02 C79 3SAT
03 02 CTEA
12 ----
05 01 9LIV
06 04 AB3
07 ----
08 ----
09 ----
10 ----
11 ----
05
C79
04 05 1000
INITIAL SET UP > MANUAL CH SET
INITIAL SET UP > MANUAL CH SET
MOVE EDIT RETURN
CH ID CH ID
MOVE EDIT RETURN
CH ID CH ID
MH200SEU_00.book Page 75 Wednesday, May 25, 2005 1:34 PM