Safety pad d-ring t-connector webbing webbing – Jumpking OR1213 User Manual

Page 17

4. Lay the Frame Pad (9) on the frame.

Do not use the trampoline without the

Frame Pad (9), which is designed to reduce the

likelihood of injury to the user from coming in con-

tact with the trampoline frame. If you do not

have a Frame Pad, call our Customer Hot Line

toll-free at 877-927-8777, Monday-Friday,8 a.m.

-5 p.m. Central Time.(Excluding Holidays)

Properly install the Frame Pad before using the

trampoline.

Thread one end of Elastic Tie-Down, then tie a knot

on V-Ring.

Repeat this step with the remaining straps which at

middle position of each pad section (not shown).

Frame Pad

Top tube

Webbing

D-ring

Look under the trampoline and locate the pairs

of straps near the edge of bed(8) and Double

D-ring and webbing near the frame.

See the inset drawing. A, B and C. Repeat this

step with the remaining straps (not shown).

Strap with Double D-ring on the pad edge

Safety pad

D-ring

T-connector Webbing

Webbing